Skip to content Skip to sidebar Skip to footer

Widget HTML #1

Home / anode / heater / size / socket / water

Water Heater Anode Rod Socket Size

Post a Comment

Water Heater Anode Rod Socket Size. Unfortunately, the problem then becomes the issue of the loose anode rod bouncing around inside the water heater. Behind/above the water heater so that the anode can the size of the drain pipe must be the same as the safety valve (ø 15 mm).

Aluminum Zinc Flexible Anode Rod KIT Water Heaters INCLUDES11/16" DEEP
Aluminum Zinc Flexible Anode Rod KIT Water Heaters INCLUDES11/16" DEEP from www.ebay.com

That is why i was inquiring about the drain plug size. The magnesium rod is larger because it can be eaten away faster; Open the door which covers your water heater and you'll see the plug (1 1/16) at the bottom.

But Rv Rods Come In A Standard Size.


Fit all models for suburban rv water heater (d, de, del, dem models). No, all anode rods are not the same size. Behind/above the water heater so that the anode can the size of the drain pipe must be the same as the safety valve (ø 15 mm).

It Will Cause Cracks In The Heater's Glass Lining, Allowing The Underlying Metal To Rust And Drastically Shortening The Life Of The Unit.


You need to remove the drain plug (which is also the anode rod) to drain it. The manual will give you routine maintenance and care. Titanium anode rod for water heater.

What Size Socket Is Needed For An Rv Water Heater Anode Rod.


It may tell you to remove it every few years to check it. Water scoop 1734 bracket s.s. If you wish to check it:

First Start With The Owners Manual Of Your Water Heater.


1.5″ aside from that, what size socket do i require for an anode rod? Anode rods have a life expectancy of about five years, but as always it really. What size socket do you need to remove an anode rod?

Open The Door Which Covers Your Water Heater And You'll See The Plug (1 1/16) At The Bottom.


As far as rv anode rods being standard, i think they all have the same threads, but different lengths are available. I am not concerned about the 'size' of the anode rod. Remove the plastic cover and unscrew the anode (40) using a 27 mm (or 24 mm) socket wrench.


Post a Comment for "Water Heater Anode Rod Socket Size"